#include "msp430x11x1.h"
#define uint unsigned int
#define uchar unsigned char
unsigned short *sptr; // Stack pointer
extern void getsptr (void); // Get Stack Pointer
uchar interrupt_flag;
uint times;
interrupt[PORT2_VECTOR] void P2_ISR(void);
interrupt[WDT_VECTOR] void watchdog_timer(void);
void delay(uchar k)
{
uchar i;
for(i=0;i<k;i++);
}
void beep(void)
{
P1OUT |= BIT3; // beep on
delay(120);
P1OUT &= ~BIT3; // beep off
}
void reset_port(void)
{
P1OUT &= ~BIT0;
P1OUT &= ~BIT1;
P1OUT &= ~BIT2;
P1OUT &= ~BIT3;
P2OUT &= ~BIT1;
P2OUT &= ~BIT2;
}
void sleep(void)
{
P2IES |= BIT0; //P2.0 interrupt hi->low edge
P2IFG &= ~BIT0; //P2.0 IFG cleared
P2IE |= BIT0; //P2.0 interrupt enabled
getsptr(); // Get the current stack pointer - 2
sptr-=1;
IE1 &= ~WDTIE; // disable WDT interrupt
reset_port();
LPM4;
}
void main(void)
{
uchar i;
WDTCTL = WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1; // Set Watchdog Timer interval to 0.5ms
P1DIR |= BIT0;
P1DIR |= BIT1;
P1DIR |= BIT2;
P1DIR |= BIT3;
P2DIR &= ~BIT0; //设为on/off按钮输入
P2DIR |= BIT1;
P2DIR |= BIT2;
reset_port();
P2IES |= BIT0; //P2.0 interrupt hi->low edge
P2IFG &= ~BIT0; //P2.0 IFG cleared
P2IE |= BIT0; //P2.0 interrupt enabled
delay(250);
_EINT(); // Enable Interrupts
sleep(); //进入低功耗
beep(); //提示
times=0;
IE1 |= WDTIE; // Enable WDT interrupt
interrupt_flag=0;
if((P2IN&BIT0) != BIT0 ) //当on/off按钮按着超过５秒后进入低功耗
{
times=0;
while((P2IN&BIT0) != BIT0 )
{
if( times>6000 ) //5s
{
beep();
sleep();
break;
}
}
}
while(1)
{
IE1 |= WDTIE; // Enable WDT interrupt
interrupt_flag=0;
.......
if( times > 12000 )
{
beep();
sleep();
}
}
}
interrupt[PORT2_VECTOR] void P2_ISR(void)
{
// Exit LPM4, disable P2.0 interrupt
P2IE &= ~BIT0; //P2.0 interrupt disabled
P2IFG &= ~BIT0; //P2.0 IFG cleared
interrupt_flag=1;
*sptr &= ~(SCG1+SCG0+OSCOFF+CPUOFF); // Clear LPM4 from the stacked status
register
beep();
}
interrupt[WDT_VECTOR] void watchdog_timer(void)
{
times++;
}
(文章推荐人：电池)
|